Porcelain tile
Hardwood
Engineered hardwood
Luxury vinyl plank
Laminate
Carpet
Shaw
Mohawk
COREtec
PergoFree in-home measure and written estimate: Shaw, Mohawk, COREtec and Pergo lines compared on your own rooms, with carpet, tile, vinyl plank, laminate and hardwood laid out side by side
Get your free estimateStyles & brands we work with
- Hardwood
- Engineered hardwood
- Luxury vinyl plank
- Laminate
- Porcelain tile
- Carpet
- Shaw
- Mohawk
- COREtec
- Pergo
See the difference
Before
After
Before
After
Before
AfterHow Much Does Tile Flooring Installation Cost in Summerlin?
Tile flooring installation in Summerlin typically costs $3,000 to $9,000 for a 500 to 800 square foot project, materials and labor included. That covers most of what we install in the valley: porcelain or ceramic through a kitchen, a hallway, a full bath, or several rooms at once. Tile starts at about $7 per square foot, and the written estimate sets the final price.
That range is wide because tile is a material-flexible job. A simple porcelain in a standard guest bath lands near the lower end. A large-format tile in a great room, on a floor that needs flattening first, or set over a heated mat pushes toward the top. What we do on this page is show you what actually moves the number, in Summerlin dollars, so you can plan before anyone walks the floor.
Key takeaways
- Typical installed price for a 500 to 800 square foot tile project in Summerlin: $3,000 to $9,000.
- Tile starts at about $7 per square foot; the exact rate depends on the product, the room, and the subfloor.
- We carry tile from Daltile, Armstrong, Mannington, Shaw and Mohawk, so you can compare real alternatives in one conversation.
- Free estimates and upfront pricing; the written estimate is what sets the final price.
- Phone line: (844) 320-7082. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Tile Flooring Installation Cost Breakdown (2026)
Here’s how the total typically breaks down for a Summerlin project. These are estimated ranges, not per-square-foot quotes. A 500 square foot job and an 800 square foot job with the same tile can land anywhere in the band depending on what we find under the existing floor.
| Line item | Typical range | What it covers |
|---|---|---|
| Full tile installation (500 to 800 sq ft, installed) | $3,000 to $9,000 | Tile, underlayment, thinset, grout, labor |
| Tile starting point (per square foot) | From about $7/sq ft | Product and labor baseline before subfloor and layout work |
| Subfloor prep and leveling | Folded into the range above | Filling low spots, addressing deflection, prepping cracks |
| Tile removal and haul-away | Folded into the range above | Taking out old tile, vinyl, or carpet and disposing of it |
| Floor repair, if you have a smaller localized fix | $250 to $1,500 per job | Cracked tile, a loose section, a single bad area |
The one comparison most people miss: a 500 square foot tile job at the low end is often just a clean removal and a simple layout in one room. An 800 square foot build at the high end might include a large-format pattern across a great room and hallway, prep work on an uneven slab or a plywood subfloor, and a threshold transition into carpet or hardwood. That’s the same $7 starting point per square foot, but a very different job. We quote both honestly. If you want to see how tile stacks up against other surfaces before you commit, our flooring installation Summerlin page walks through carpet, tile and hardwood side by side.
Costs move up when: the tile is large-format or a specialty material, the floor plan has a lot of cuts, layout or diagonal work, the subfloor needs flattening, the existing floor is hard to remove, or the job needs moving furniture and appliances. Costs move down when: the room is simple and rectangular, the existing floor comes up cleanly, you’re tiling over a flat, sound slab that’s ready for thinset, and the tile is a standard porcelain in a straightforward grid.
What Affects Tile Flooring Installation Pricing in Summerlin
Summerlin floors have a few things in common that show up on nearly every estimate. Knowing them helps you read a quote without a phone call.
- Concrete slab and desert conditions. Much of Summerlin is built on slab, and slabs in the desert can dry unevenly and pick up hairline cracks as the ground shifts with the seasons. Those don’t always need fixing, but they’re why we check the floor at the estimate before we promise a tile layout, and why prep can add to a job that looked simple on paper.
- The room and how it lives. A full bath, a laundry, an entryway and a covered patio all see different moisture. The right tile for how a room actually lives is not always the same tile across the whole house. A wet area may need a denser porcelain; a family room calls for something that handles traffic and still looks right with the rest of the house.
- Tile size and layout. Large-format tile is heavier, needs a flatter floor, and takes more skill to keep grout lines straight. Diagonal layouts, herringbone and mixed patterns cost more in labor than a simple grid. A straightforward install in a mid-size room is where the lower end of the $3,000 to $9,000 band lives.
- Removal of the old floor. Pulling up old tile, thinset, vinyl or carpet adds labor. If there’s more than one layer, or the old thinset is bonded hard to the slab, that work climbs. We price it up front rather than surprising you mid-job.
- Subfloor condition. A flat, sound surface keeps the install clean. Low spots, high spots, deflection on a wood subfloor, or moisture issues change the prep required. That prep is the difference between a floor that stays bonded for years and one that pops loose at the grout line in the first dry season.
- Material choice. Daltile porcelain, Armstrong ceramics and Mannington tile all sit in different price bands. We install and service the floor the customer chooses, so the material is your call. The trade-off is always between a lower material cost and how much abuse that tile will take in that room.
How to Save on Tile Flooring Installation
There’s no discount to chase here. The savings come from how you scope the job. These are the moves that actually lower the number.
- Tile the rooms that need it, not the whole house. Rooms like bathrooms, entries and kitchens carry the most water and traffic. Carpet in a bedroom and tile in a bath is often a smarter spend than tile wall-to-wall, and it keeps your total near the lower end of the range.
- Pick a mid-band porcelain from a name brand. A standard porcelain in a grid pattern from Daltile or Armstrong installs faster and needs less prep than a large-format or specialty tile. You still get the durability. You save on labor and material together.
- Bundle the estimate with other flooring. If you’re already considering tile in the bath and carpet in the bedroom, get them estimated together. We handle both, and comparing the two in one conversation keeps you from quoting twice.
- Repair before you replace. If a single cracked tile or a loose patch is the only problem, a floor repair at $250 to $1,500 per job is far cheaper than a full install. Look at the tile flooring installation scope first and decide whether you’re fixing or replacing.
- Get the estimate free. There’s no cost to have your floor looked at and quoted. Call (844) 320-7082 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
One more: don’t skip the prep to save money. A floor that’s flattened and prepped correctly is what keeps grout lines straight and tile bonded. Saving a few hundred dollars on prep is the most reliable way to spend more later. We’ll tell you honestly at the estimate whether your floor needs it or not.
What Is Included in a Tile Installation Estimate?
A typical tile estimate from us covers the tile itself, underlayment, thinset, grout, the labor to set and finish, and removal and haul-away of the old floor when you’re replacing it. Subfloor prep is priced in when your floor needs it. The one thing not in the total until you choose it is the tile material itself; that’s set once you’ve picked the product at the estimate.
Most homeowners ask about three things: whether the price moves if the room has odd corners (it can, because cuts and layout take time); whether the old floor needs to come up (not always – sometimes it can be covered, and we’ll say so if that’s the better route); and whether a flat, sound slab is ready for install as-is (we check that at the estimate, every time). Our technicians have up to 9 years of experience, and that’s the kind of thing you rely on them for. Precision installation is what makes a great product last.
Why Tile in Summerlin, and When It Makes Sense
Tile is the floor that handles desert conditions well. It stays cool underfoot in the summer heat, it doesn’t care about the dry air, it handles a wet bath and a busy kitchen without complaint, and it’s easy to clean after a dusty day. It’s also the easiest surface to repair in a single spot if something does go wrong. In a Summerlin home, tile in the baths, the entry, the laundry and the kitchen is usually the right call.
The trick is choosing the right tile for the right room, then installing it well enough that it lasts. That’s where brand fluency helps. We carry tile and hard-surface products from nine manufacturers across the categories we install – Shaw, Mohawk, COREtec, Pergo, LifeProof, Mannington, Armstrong, Daltile and Karndean – so you can compare a Daltile porcelain against an Armstrong ceramic in a single conversation rather than driving across the valley. We install what you choose, and the craft is in keeping the grout lines straight and the bond solid. If you want the full picture of what we install, we also handle carpet installation and hardwood floor refinishing under the same roof, so one specialist can specify tile for the bath, carpet for the bedroom, and refinish the original hardwood in the hall instead of covering it.
And before you replace good hardwood with tile, we’d say this: refinish before you replace. A hardwood floor that’s just tired may look like new after sanding and a fresh finish, for a fraction of the cost of a new floor. That’s a call only an installer who does both can make honestly.
FAQs – Tile Flooring Installation Cost
How much does tile flooring installation cost in Summerlin?
Typical installed cost for a 500 to 800 square foot tile project in Summerlin is $3,000 to $9,000, materials and labor included. Tile starts at about $7 per square foot. The written estimate sets the final price. Call (844) 320-7082 for an exact quote – estimates are free.
Is it cheaper to repair a tile floor or replace it?
Repair is usually the cheaper route if the problem is a single cracked tile or a loose patch – floor repair runs $250 to $1,500 per job. If the floor is failing across a whole room, or the grout and tile are both wearing out, a full install at $3,000 to $9,000 is the better spend. We’ll tell you which side you’re on at the estimate. Call (844) 320-7082 – estimates are free.
Does the cost change if I remove the old tile myself?
It can lower the install, because removal and haul-away is part of the labor in the $3,000 to $9,000 range. We price the job either way, and we’ll tell you honestly whether doing the demo yourself is worth it. Call (844) 320-7082 for a free estimate that covers both options – estimates are free.
Can tile be installed the same day I get an estimate?
No – tile is a booked job, and the schedule is set at the estimate, not before. Same-day service is available for some repairs, but a full install needs the walk-through, the tile choice, and the prep checked first. Call (844) 320-7082 to get on the schedule.
Do you have to flatten the subfloor before laying tile in Summerlin?
Often, yes, and it’s included in the $3,000 to $9,000 range when it’s needed. Desert slabs in Summerlin can be uneven and pick up hairline cracks, which means a flat, sound surface has to be prepped before tile is set. We check that at the estimate and tell you if it’s necessary. Call (844) 320-7082 for an exact quote – estimates are free.
What does tile cost per square foot in Summerlin?
Tile starts at about $7 per square foot for a typical install. The exact rate depends on the product, the room and the subfloor, and the written estimate sets it. Call (844) 320-7082 for a free estimate – estimates are free.
If you’re ready to plan a tile project, start with a free estimate. We’ll walk the floor, show you what the job really involves, and put a number on paper you can trust. Call (844) 320-7082. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The price is set per job by the written estimate, and what we quote is what we stand behind.
Written by the team at Flooring Installation Summerlin.
Pricing reflects the Summerlin market as of 2026. Flooring Installation Summerlin offers free estimates – call (844) 320-7082.
What Our Customers Say
"Laminate in the family room and the hallway. They left a gap along the walls and covered it with new quarter round, and the floor has not buckled or creaked."
- Megan Doyle"He measured every room at the estimate and gave me the number on paper that same day. The number on the paper was the number I paid."
- Allison Norris"Staggered the plank ends properly so there is no stair-step pattern across the room, and the last row along the wall is not a thin sliver."
- Daniela Rodriguez